Engine Block Casting Numbers
The block casting number on small block and big block Chevrolet V8 motors is located on a ledge found at the rear of the block, most often on the driver's side. How to unlock a telstra prepaid phone for free. This ledge is below the deck of the block and the ledge forms the mating surface between the block and the transmission bell housing.
In 68-69 model cars, the serial (VIN) number of the car the engine was installed in is stamped next to, or under the engine code ID. Starting in 1970, the serial number is stamped either above the oil filter, somewhere on the block pad (in front of the cylinder head), or on the transmission flange somewhere. Chevrolet issued technical service. There are two locations for the engine serial number on the engine block for the 2001 Chevy S10 GM 4.3 motor. One location is just in front of the flywheel position on the back, top of the motor.
- Small Block Chevy Engine Block Identification General Engine Block Specifications While 6 different bore size blocks have been produced, the small block engine can be classified into 3 bore sizes and 3 main bearing sizes. 283 blocks (3.875' bore, 2.3' main), 302/327/350 blocks (4' bore, 2.3' or 2.45' mains), and 400 blocks (4.126', 2.65' mains).
- Finding the block numbers on my old chevy v8 first gen.
283 Chevy Engine Serial Number Location Engine
Block Casting Number | Engine Size | Engine Horsepower | Main Caps/Information |
3892657 | 327 | 275 - 325 | 2-bolt Used for most 1967 327 applications |
3896948 | 283 | 195 | 2-bolt Flint cast block |
3903352 | 327 | 275 - 325 | 2-bolt Used mid to late 1967. |
3902406 | 396 | 325 - 350 375 | 2-bolt 4-bolt Used for late 1966 and 1967 years only due to change in oil galleys. Second design 396, no dowel pin on timing cover and last year to have this timing cover design and canister type oil filter. Casting date is located on the right lower side of the block near the freeze plug. this block also has the tall tower distributor casting boss in the lifter gallery. |
Block casting #3902406 ~ 396 2-bolt (325hp/350hp) or 4-bolt (375hp) main caps.
Prevailing theory is the letter 'P' indicates the block was destined for passenger car and not a truck.
Block casting #3892657 ~ 327 (275/325hp) 2-bolt main caps.
Chevy Engine Serial Lookup
Cylinder Head Casting Numbers
Casting Number | Engine Size | Engine Horsepower | valve Size (intake/exhaust) - combustion chamber volume |
3884520 | 283 | 195 | 1.72/1.50 - 60.530 c.c. Pyramid casting symbol |
3890462 | 327 | 275 325 | 1.94/1.50 - 63.305 c.c. 2.02/1.60 - 63.305 c.c. Double-hump casting symbol used through late May, 1967. |
3917291 | 327 | 275 325 | 1.94/1.50 - 63.305 c.c. 2.02/1.60 - 63.305 c.c. Used after May, 1967. Same as #3890462 except it has temp sending boss (may or may not be tapped) and valve guide boss enlarged to 0.410-inch. |
3904390 | 396 | 325 - 350 | 2.06/1.72 - 98.427 c.c. - oval port No spark plug shield boss as with 1965 and 1966 cylinder heads. Used until January, 1967 when replaced with #3939802. |
3939802 | 396 | 325 - 350 | 2.06/1.71 - 100.967 c.c. - oval port Production began in January, 1967 through April, 1967 replacing #3904390 with redesigned combustion chamber. |
3917215 | 396 | 325 - 350 | 2.06/1.71 - 100.967 c.c. - oval port Late production replacement for #3939802. Temp sending unit boss present but not tapped until 1968 model year. |
3904391 | 396 | 375 | 2.19/1.72 - 106.8 c.c. - rectangle port Early production. No temp sending boss. |
3919840 | 396 | 375 | 2.19/1.72 - 106.8 c.c. - rectangle port Late production. Temp sending boss and may or may not be tapped and two accessory bolt holes added. Domed casting symbol. |
Engine Assembly Date/Suffix Code:
The engine assembly code looks similar to T0601ED. In this case the first letter 'T' stands for an engine factory Tonawanda, an 'F' or 'V' for Flint or 'K' for McKinnon Industries. The next two digits indicate the month of the year, in this example '06' or the sixth month, June. The '01' indicates the 1st day of the month. So what do we have so far in this example? The motor was assembled at the Tonawanda factory on June 1st. The calendar year itself is not given but remember that the engine assembly had to be manufactured and assembled before the car was built. What we have left is the 'suffix code' which in this example is ED, a 1967 396cid with 325hp. Chevrolet used two letters to code the type, size, and horsepower rating of the engine and the transmission type to be used with that engine.
The final vehicle assembly plant sometimes stamped a CON VIN (CON VIN) on the same machined area as the engine ID code. This stamping wasn't mandated until the 1968 model year but has been found (and not found) on 1967 models. If yours has the CON VIN (and hasn't obviously been re-stamped), you can be sure the engine is original to your Chevelle. The CON VIN might look like 'T0601ED7A123456' stamped into the pad on the front passenger side of the block. In this example, 7A123456 decodes to 1967 model year, Atlanta final assembly, and the serial number of the VIN. Sometimes the CON VIN was stamped into a different area of the block on the flange edge of the rear of the block, near the bell housing mating surface. Sometimes the stamping is found above the timing cover mating surface on the front of the block.
While NOT a hard and fast rule, it has been found that mainly the higher horsepower engines such as the 327/325 RPO L79 and all SS 396 engines have a CON VIN stamping. This CON VIN stamping is usually found on the engine ID pad located on the block in front of passenger side head such as this example.
Engine Block Casting Numbers
The block casting number on small block and big block Chevrolet V8 motors is located on a ledge found at the rear of the block, most often on the driver's side. How to unlock a telstra prepaid phone for free. This ledge is below the deck of the block and the ledge forms the mating surface between the block and the transmission bell housing.
In 68-69 model cars, the serial (VIN) number of the car the engine was installed in is stamped next to, or under the engine code ID. Starting in 1970, the serial number is stamped either above the oil filter, somewhere on the block pad (in front of the cylinder head), or on the transmission flange somewhere. Chevrolet issued technical service. There are two locations for the engine serial number on the engine block for the 2001 Chevy S10 GM 4.3 motor. One location is just in front of the flywheel position on the back, top of the motor.
- Small Block Chevy Engine Block Identification General Engine Block Specifications While 6 different bore size blocks have been produced, the small block engine can be classified into 3 bore sizes and 3 main bearing sizes. 283 blocks (3.875' bore, 2.3' main), 302/327/350 blocks (4' bore, 2.3' or 2.45' mains), and 400 blocks (4.126', 2.65' mains).
- Finding the block numbers on my old chevy v8 first gen.
283 Chevy Engine Serial Number Location Engine
Block Casting Number | Engine Size | Engine Horsepower | Main Caps/Information |
3892657 | 327 | 275 - 325 | 2-bolt Used for most 1967 327 applications |
3896948 | 283 | 195 | 2-bolt Flint cast block |
3903352 | 327 | 275 - 325 | 2-bolt Used mid to late 1967. |
3902406 | 396 | 325 - 350 375 | 2-bolt 4-bolt Used for late 1966 and 1967 years only due to change in oil galleys. Second design 396, no dowel pin on timing cover and last year to have this timing cover design and canister type oil filter. Casting date is located on the right lower side of the block near the freeze plug. this block also has the tall tower distributor casting boss in the lifter gallery. |
Block casting #3902406 ~ 396 2-bolt (325hp/350hp) or 4-bolt (375hp) main caps.
Prevailing theory is the letter 'P' indicates the block was destined for passenger car and not a truck.
Block casting #3892657 ~ 327 (275/325hp) 2-bolt main caps.
Chevy Engine Serial Lookup
Cylinder Head Casting Numbers
Casting Number | Engine Size | Engine Horsepower | valve Size (intake/exhaust) - combustion chamber volume |
3884520 | 283 | 195 | 1.72/1.50 - 60.530 c.c. Pyramid casting symbol |
3890462 | 327 | 275 325 | 1.94/1.50 - 63.305 c.c. 2.02/1.60 - 63.305 c.c. Double-hump casting symbol used through late May, 1967. |
3917291 | 327 | 275 325 | 1.94/1.50 - 63.305 c.c. 2.02/1.60 - 63.305 c.c. Used after May, 1967. Same as #3890462 except it has temp sending boss (may or may not be tapped) and valve guide boss enlarged to 0.410-inch. |
3904390 | 396 | 325 - 350 | 2.06/1.72 - 98.427 c.c. - oval port No spark plug shield boss as with 1965 and 1966 cylinder heads. Used until January, 1967 when replaced with #3939802. |
3939802 | 396 | 325 - 350 | 2.06/1.71 - 100.967 c.c. - oval port Production began in January, 1967 through April, 1967 replacing #3904390 with redesigned combustion chamber. |
3917215 | 396 | 325 - 350 | 2.06/1.71 - 100.967 c.c. - oval port Late production replacement for #3939802. Temp sending unit boss present but not tapped until 1968 model year. |
3904391 | 396 | 375 | 2.19/1.72 - 106.8 c.c. - rectangle port Early production. No temp sending boss. |
3919840 | 396 | 375 | 2.19/1.72 - 106.8 c.c. - rectangle port Late production. Temp sending boss and may or may not be tapped and two accessory bolt holes added. Domed casting symbol. |
Engine Assembly Date/Suffix Code:
The engine assembly code looks similar to T0601ED. In this case the first letter 'T' stands for an engine factory Tonawanda, an 'F' or 'V' for Flint or 'K' for McKinnon Industries. The next two digits indicate the month of the year, in this example '06' or the sixth month, June. The '01' indicates the 1st day of the month. So what do we have so far in this example? The motor was assembled at the Tonawanda factory on June 1st. The calendar year itself is not given but remember that the engine assembly had to be manufactured and assembled before the car was built. What we have left is the 'suffix code' which in this example is ED, a 1967 396cid with 325hp. Chevrolet used two letters to code the type, size, and horsepower rating of the engine and the transmission type to be used with that engine.
The final vehicle assembly plant sometimes stamped a CON VIN (CON VIN) on the same machined area as the engine ID code. This stamping wasn't mandated until the 1968 model year but has been found (and not found) on 1967 models. If yours has the CON VIN (and hasn't obviously been re-stamped), you can be sure the engine is original to your Chevelle. The CON VIN might look like 'T0601ED7A123456' stamped into the pad on the front passenger side of the block. In this example, 7A123456 decodes to 1967 model year, Atlanta final assembly, and the serial number of the VIN. Sometimes the CON VIN was stamped into a different area of the block on the flange edge of the rear of the block, near the bell housing mating surface. Sometimes the stamping is found above the timing cover mating surface on the front of the block.
While NOT a hard and fast rule, it has been found that mainly the higher horsepower engines such as the 327/325 RPO L79 and all SS 396 engines have a CON VIN stamping. This CON VIN stamping is usually found on the engine ID pad located on the block in front of passenger side head such as this example.
How to install gta 5 for mac.
T0609ED ~ Tonawanda, N.Y., June 9, 1967 ~ 396/325hp w/manual transmission
Note CON VIN stamped at Kansas City final assembly plant.
283 Chevy Engine Serial Number Location 1948 Ford F1 Pickup
Mandatory VIN stamping of all engines was not required by federal law until the 1968 model year, actually January 1, 1968.